Single Shaft Shredder S Series PDF Download

Solid Waste Solved
\
Single Shaft Shredder Introduction:
Single Shaft Shredder from Zibo United Tech Machinery Co., Ltd. is one crushing machine with perfect design. It is widely used and qualified to shred various waste materials, such as plastic block & pipes, and waste cable & wire, wood, paper, dometic rubbish, electric scrap, etc. We could work out a suitable proposal for our customer according to their specific requirements, such as the fed material and next processing plan. After being shredded by our shredder, the output material could be used to directly recycling or go into the next step of size reduction.
With the function of Siemens microcomputer control system, it is possible to control automatically start, stop. Automatic reverse sensors to protect the machine against over loading and jamming. The output capability typically range between 300kg/hr –5,000kg/hr+ depending on the different model and different materials.
The materials can be fed directly without an addtitional fedding system. With the high capactiy hopper and hydraulic driven ram effectively prevents materials from running and wandering, thus ensuring high efficiency speed shredding with lower noise. With the function of Siemens microcomputure electric control system, it is possible to control automatically start, stop, automatic reverse sensors to protect the machine against over loading and jaming. It is easier to shredding the wastes. 
Cutting Principle about the Single Shaft Shredder:
The cutting part of the single shaft shredder including the rotor, rotor blade, counter blade and the screen. The minimum mounting clearances between the rotor blade and counter blade is 0.1mm. The motor drive the rotor by high speed rotating trough the speed reducer, therefore the rotor blade cutting the counter blade. After one cutting, the materials will be discharged if its size smaller the screen mesh size. Or the material will be double or more cutting, until the size is smaller than the screen holes.
\
Single Shaft Shredder Advantage:
* Detachable Rotor Blade, easy disassemble and installation, and simple maintenance.
* Automatic Feeder, increase produce efficiency.
* Quick change Screen for accurate particle size control.
* Shock Absorbing Gearbox reduces stress on Drive components.
* Integrated Rotor, assured the cutter clearance between the Rotor Blade and the Counter Blade.
* Enclosed Bearing protection design, waterproof and dustproof, extend the bearing work life.
* Siemens PLC Control System, automatic reverse sensor to protect the machine against over loading and jamming.
* Provide the Rotor Cooler System against the low melting materials, prevent the materials burning while the temperature higher.
\
Single Shaft Shredder Applications:
widely used in the solid waste materials with a little metal, like coated paper, news paper & documents, plastic lump, foam, wood, rubber block, cable & wire, home appliances, beverage cans, etc. Its output size is small and uniform. 
\
To protect our environment is more than to treat the solid waste, but to the reuse. Crush is almost the first step for any recycle processing.

Single Shaft Shredder Technical Data:
Model S2250 S2260 S3060 S3080 S4080
Dimension L/W/H(mm) 1780*1190*1690 1780*1290*1690 2455*1478*1700 2455*1678*1700 2825*1747*1875
Cutting Chamber Size(mm) 790*500 790*600 1200*600 1200*800 1400*800
RAM(mm) 500 600 600 800 800
Rotor Blade Diameter(mm) 220 220 300 300 390
Rotor Ratate Speed (r/min) 80 80 80 80 80
Rotor Blade Quantity (pcs) 20+4 24+4 30+4 42+4 42+4
Counter Blade Quantity(pcs) 2+2 2+2 2 2 2
Motor Power(kw) 15 18.5 22 30 37
Pushing Device Power(kw) 1.5 1.5 2.2 2.2 2.2
Net Weight(kgs) 1300 1400 1550 1950 3500
           
Model S40100 S40120 S40150 S48150 S48200
Dimension L/W/H(mm) 2825*2004*1875 2825*2564*1875 2825*2964*1935 3255*4415*2720 3255*4415*2720
Cutting Chamber Size(mm) 1400*1000 1400*1200 1400*1500 1650*1500 1650*2000
RAM(mm) 1000 1200 1500 1500 2000
Rotor Blade Diameter(mm) 390 390 390 480 480
Rotor Ratate Speed (r/min) 80 80 80 80 80
Rotor Blade Quantity (pcs) 54+4 66+4 90+4 90+4 114+4
Counter Blade Quantity(pcs) 25 2 3 3 4
Motor Power(kw) 45 55 75 90 75+75
Pushing Device Power(kw) 5.5 5.5 5.5 7.5 7.5
Net Weight(kgs) 4000 5000 6200 8000 11000
           
Model S48250 S66150 S66200 S66250 S66300
Dimension L/W/H(mm) 3255*4615*2720 4100*3450*3000 4100*3950*3000 4100*4450*3000 4100*5500*3000
Cutting Chamber Size(mm) 1650*2500 1550*1500 1550*2000 1550*2500 1550*3000
RAM(mm) 2500 1500 2000 2500 3000
Rotor Blade Diameter(mm) 480 660 660 660 660
Rotor Ratate Speed (r/min) 80 80 80 80 80
Rotor Blade Quantity (pcs) 144+4 126+4 158+4 225+4 291+4
Counter Blade Quantity(pcs) 5 3 4 5 6
Motor Power(kw) 90+90 75+75 90+90 110+110 132+132
Pushing Device Power(kw) 7.5 7.5 7.5 7.5 7.5
Net Weight(kgs) 12500 12100 12500 14200 15500
1. The voltage about the power supply can be selected by the customer’s specific requirements.
2. The shredder capacity can be influenced by the material compostion and output size.
The above specifications are only for reference and subject to change without prior notice, please confirm with our sales representative when making order.

Welcome to contact with us to get more details product information. We are glad to introduce you the most suitable machie, design the most resonable proposal as your production requirements. Our task is to support our customers who are in the solid waste & refuse management industries to get a higher production efficient, impove their product quality and value so that they can get a greatest progress in the keen competition.